Key Features of IVF Workstations 100 Series
The air flow is filtered through a VOC prefilter and HEPA filter to ensure filtered Grade A air quality
HEPA filter classification H-14 according to DIN EN 1822 removes at least 99.995 % of all airborne particles down to 0.3 microns.
ALU Heat System with 3 individual temperature sensors to ensure high temperature stability at +/- 0.4 oC over the work area (6 sensors in L126Dual)
Incorporated K-SYSTEMS Heated Glass Stage at temperature stability +/-0.7 oC
Airflow 0.32 m/s
Integrated Humidified Gas System
Operator and ergonomically friendly
Various optional features
RI Witness ready
Standard Features for IVF Workstations 100 Series
K-SYSTEMS well proven Alu HeatTM System provides the most precise temperature control.
- The heat distribution is controlled in
- 3 + 1 heating zones in L100 and L200 Series
- Calibration of each heating zone can be seen and adjusted at the main control panel.
- Each heating zone is individual calibrated with specialized software to monitor each zone and ensure a uniform heat distribution.
- The unique design of the Alu Heat systems ensures excellent heat transfer to the samples and avoidance of temperature overshoot.
- The unit temperature is constantly being displayed on the front panel of the work area.
Alu Heat System with 3+1 zones is standard in L100 and L200 series.
RI Witness uses Radio Frequency Identification (RFID) technology to monitor all critical work carried out in the Laboratory, creating a complete record of each stage of a patients cycle.
RI Witness is watching, tracking and recording all of the time and Locks the patients identity to the sperm, eggs and embryos at every stage of the treatment.
The system also actively prevents patients samples coming into proximity with those of other patients and gives everyone peace of mind that the best possible processes are being employed.
Heated Glass Stage
K-SYSTEMS has developed and produced a controlled heating temperature system which is integrated in the microscope light opening.
- Light opening Ø90 mm standard L100 and L200 series
- Excellent heat distribution and stability
- Robust and cost efficient
Heated Glass Stage Ø90 mm with integrated LED.
Temperature accuracy of +/- 0.4oC
Outstanding heating technology
As embryos are sensitive to temperature fluctuations a controlled heating temperature system is integrated in the microscope light opening. The system is controlled on the control panel and provides the highest stability possible of the media in the culture dishes during microscopy.
All L100 have heated glass Ø90 mm as standard feature.
The Gassing and Humidification System – Maintain the pH in the media during operations.
Integrated Gassing and Humidification System GH02
As a standard, the 100 series has an integrated gas humidification system. Pre-mixed gas is required.
The pre-mixed gas is humidified through a heated gas washing system and extruded through nozzles in the table plate covered by glass
hoods (glass hoods optional). With the regulator you can adjust the level of humidification by adjusting the gas flow. The gas flow can be adjusted between 0-50 ltr/h.
The humidified and heated gas is diffused through 2 nozzles in the table plate. To maintain the pH in the media glass incubator hoods can be used.
An optional solution when RI Witness is installed in the 100 series is to have the humidified gas diffused through connectors in the inner wall using silicone tubes connected to glass hoods (glass hoods optional).
The Front Window
Eye Draught Protection
Eye Draught Protection is an easily adjustable plate that slides to the top of the microscope and thus prevent draught flow to trouble the operator eyes.
Standard in L124IVF, L126IVF, L126Dual and L126MP.
Sliding Window is provided with a slider to adjust the device vertically. This makes it easy to adapted to any microscope and desired working height.
Standard in L200 Series
A semi-circle cutout in the front window ensures space to adjust the height of the microscope in order to achieve the desired working height.
Standard in L124 ICSI and L125
Optional Features for IVF Workstations 100 Series
Fully Sealed 19″ high resolution monitor.
An excellent tool for viewing, training and education.
The viewing panel of glas is designed to non disturbance of the air flow and easy to clean.
The monitor supports most of the signals coming from modern digital cameras and supports DVI, HDMI as well as analog signals.
Connect the monitor to your external PC and you bring the pictures right into your office or meeting room.
Build-in 15 ltr Micro Incubator.
To optimize your Work conditions inside the Work area, and to reduce the frequency of opening of large CO₂ incubators, a 15 ltr Micro Incubator can be an Integrated part of your Workstation.
The Micro Incubator has two shelves and a two level alarm system. As an option a glass inner door can be supplied.
Heated Pass Through Tunnel
To improve the Work flow and to reduce the time of handling oocytes in an unheated and unstable environment, the Heated Pass Through Tunnel is a great alternative to a hatch in the door between the aspiration room and the embryo lab.
The Heated Pass Through Tunnel is made of stainless steel with Integrated heating elements and top hinged polycarbonate lid.
Stands for IVF Workstations
Stand with shelf for computer for your IVF Workstation
Integration of the computer in the support stand of your Workstation will offer you several advantages.
- More easy cleaning under and around the Workstation
- Cables and fittings becomes integrated part of the support stand
- No more loose hanging cables
- All details prepared to ensure a high level of usability
Ergonomic elevation support stand for your IVF Workstation.
The K-SYSTEMS® Support Stand with Electrical Adjustable Height will offer you maximum comfort, either sitting or standing
- Adjust the work height exactly to your need with this smooth non-step elevation system
- A simple touch of the button will adjust precisely the work height in the range of: 790-1110 mm
- Stability and safety developed in accordance with EN 61010 assures high stability also at highest elevation level
- The use of high quality components ensures the highest level of usability
Compatible with existing 100 and 200 series Workstations (except MP and ICSI versions)
Integrated Keyboard Shelf
Can be integrated into workstations in the L100 series (except L124 ICSI).
Can be reinstalled on all Workstations in the L100 series, manufactured after 2010 (exceptL124 ICSI).
Integrates with both Standard Stand, Electrical Adjustable Stand and Stand with Shelf.
Many different positions depending on the client’s needs
Max load 10 kg
Combined with Stand with Shelf it represents the perfect solution for PC.
Shelf surface area: 418 x 313 mm (Length x Breadth).
Height of shelf including mounting brackets: 107 mm.
Distance from top of shelf to lower surface of the table: Approx 70 mm.
Light Source with LED Light
Light sources for stereo microscopes. Conveniently mounted underneath the table top leaving a smooth and even surface above.
LS112 for 100 series.
The LED light is clear and safe and enables the user to get fast and accurate results in observation of embryos.
- The clear LED light gives you the highest intensity in the visual field.
- Durable – up to 35.000 hours of continuous light.
- No light in the UV spectrum
- Easily adjustable dark and light field illumination
- Slot for filter installation (red, blue, green filter)
- Low power consumption
High end illumination system features two condenser lenses, 360 degree rotational and 40 mm horizontally moveable two sided mirror.
Slot for filter installation (red, blue, green filter).
|Overall Dimensions (WxDxH)||1846x735x2020 mm|
|Standard Working Height||835mm – 860mm|
|Distance from tabletop to HEPA-filter||710 mm|
|Power Consumption||988 watt|
|Mains Voltage||230VAC or 115 VAC|
|Mains Frequency||50Hz/60Hz or 60Hz|
|Required Power||4.3 A / 8.6 A|
|6,131,811,121||L126 DUAL 115V|
|6,132,811,121||L126 DUAL 115V Monitor|
|6,133,811,121||L126 DUAL 115V Space for Incubator|
|6,134,811,121||L126 DUAL 115V Heated Tunnel|
|6,131,911,121||L126 DUAL 115V RI Witness|
|6,132,911,121||L126 DUAL 115V RI Witness Monitor|
|6,133,911,121||L126 DUAL 115V RI Witness Space for Incubator|
|6,134,911,121||L126 DUAL 115V RI Witness Heated Tunnel|
|6,131,812,121||L126 DUAL 230V|
|6,132,812,121||L126 DUAL 230V Monitor|
|6,133,812,121||L126 DUAL 230V Space for Incubator|
|6,134,812,121||L126 DUAL 230V Heated Tunnel|
|6,131,912,121||L126 DUAL 230V RI Witness|
|6,132,912,121||L126 DUAL 230V RI Witness|
|6,133,912,121||L126 DUAL 230V RI Witness|
|6,134,912,121||L126 DUAL 230V RI Witness|
Order codes for additional features and options of the L126 IVF Dual Workstation
|12145||Stand w/shelf L126|
|12112||El. Adj. stand L126 230V|
|12112-a||El. Adj. stand L126 120V|
|41093||LED Lightsource LS112|
|41103-1||Green Filter for lightsource, LS112, LS12|
|41104-1||Red Filter for lightsource, LS112, LS12|
|41105-1||Blue Filter for lightsource, LS112, LS12|